Home
Coverage
Services
Products
Company
Projects Contact

Proeye Communications & Security Systems

Commercial mobile coverage, DAS and ICT infrastructure solutions

Specialist telecommunications design, integration and project delivery across Australia and New Zealand.

  • Commercial & industrialRetail, warehouses and logistics, aged care, healthcare and multi-level buildings
  • Manufacturer credentialsNextivity Elite System Integrator and Authorized Partner, with five CEL-FI certifications
  • Nationwide project deliveryProjects across Australia and New Zealand, from our Melbourne base, since 1999

Nextivity Elite System Integrator and Authorized Partner, with five Nextivity certifications. See our credentials

Nextivity Authorized Partner badge
Authorized Partner
Nextivity Elite System Integrator badge
Elite System Integrator
Nextivity Certified: CEL-FI Design badge
CEL-FI Design
Nextivity Certified: CEL-FI Installation badge
CEL-FI Installation
Nextivity Certified: CEL-FI Maintenance badge
CEL-FI Maintenance
Nextivity Certified: CEL-FI Enterprise Sales badge
CEL-FI Enterprise Sales
Nextivity Certified: Hardware Installation badge
Hardware Installation
ARCIA, Australian Radio Communications Industry Association
Australian Radio Communications Industry Association

The problems we are called in to solve

Most enquiries start with a building that is not working the way the people inside need it to.

Calls drop and data stalls indoors

Concrete, steel and low-E glass block mobile signal. Staff, patients, visitors and connected equipment lose service where they need it most.

Residents miss out on familiar TV

Aged care and managed facilities need multilingual and faith-based channels, plus a simple way to share menus and activities on every screen.

Sites need protecting and monitoring

Entry points, assets and people need cameras and access control that can be checked and managed remotely.

Systems need upgrading without disruption

Ageing UPS, nurse call, DECT, radio and TV systems have to move to IP platforms while the building stays operational.

Environments we work in

  • Hospitals & clinics
  • Aged care
  • Office buildings
  • Retail stores
  • Warehouses & logistics
  • Basements & car parks
  • Lifts
  • Loading areas
  • Gymnasiums & pools
  • Construction & mining sites
  • Hotels
  • Data centres
  • Events & venues
  • Education
Panel antenna on roof structure. SISO panel antenna suspended from the roof structure over the trading floor.

A SISO panel antenna suspended from the roof structure of a large-format retail warehouse, part of a three-carrier active DAS installed by Proeye.

How a coverage project runs

Every mobile repeater DAS follows the same disciplined sequence, with documentation at each stage.

  1. Desktop analysis & signal survey

    A free initial desktop analysis, then onsite RF and cellular measurements to map coverage problems and identify donor signals.

  2. System design & engineering

    A DAS designed around the building's layout, materials and usage, using CEL-FI equipment listed for the carriers involved.

  3. Compliance & carrier coordination

    Each carrier's permission is part of the project, and systems are installed to ACMA requirements. How repeaters are regulated.

  4. Installation

    Turnkey and scalable managed installations by technicians experienced in aged care, retail, healthcare and construction.

  5. Commissioning & reporting

    Post-installation testing, signal validation and handover documentation, then ongoing maintenance and support.

Recent installations

Genuine Proeye projects in retail and aged care, from rooftop donor antennas to commissioning and measured results. Client names are withheld.

Victoria 2026

Large-format retail warehouse

Three-carrier in-building coverage for a high-bay warehouse store, from rooftop donor antennas to coverage units on the roof structure.

View project

Victoria 2026

New retail development

Two pre-built Proeye repeater hubs delivering multi-carrier coverage to a new store and its undercroft car park, installed during fit-out.

View project

Victoria 2025–2026

Residential aged care community

A new multi-level aged care building, followed from site survey during construction through to as-built signal testing, with fully remote-managed Platinum repeater hubs.

View project

Victoria 2024

Lift car coverage with CEL-FI QUATRA

Mobile coverage inside a lift car: a CEL-FI QUATRA 4000e Coverage Unit rides on the car top and feeds a flush dome antenna in the car ceiling, cabled back to the Network Unit in the communications cabinet.

View project

Victoria

Courier depot repeater hubs

Three repeater hubs, one each for the ground floor, level 1 and level 2, combining CEL-FI G41 4G modules with CEL-FI G51 5G modules for a courier organisation, fed from grid donor antennas on braced masts on the roof.

View project

Victoria 2026

School campus repeater hubs: service and 5G upgrade

A school campus with two repeater hubs, one in a basement comms room and one in a level 1 comms riser, each with a CEL-FI G41 module for Telstra, Optus and Vodafone. Proeye diagnosed a fault remotely, then replaced the hub batteries and updated the repeater firmware on site, which enabled 5G support and restored the connection to the CEL-FI WAVE portal.

View project

Victoria

AV Hub: Foxtel, free-to-air TV and digital signage

An aged care community where one Proeye AV Hub in the comms rack receives Foxtel by satellite and free-to-air television, adds two in-house What's On channels from a digital signage player, and sends them all through the existing MATV cabling, so the televisions need no set-top box of their own.

View project

New South Wales 2025–2026

Residential aged care community

Building-wide mobile coverage across a multi-level aged care community, surveyed level by level and commissioned with call tests on every floor.

View project

New South Wales 2026

Hospital mobile repeater hub

A wall-mounted mobile repeater hub with one CEL-FI G41 module each for Telstra, Optus and Vodafone, fed from rooftop grid donor antennas. Every tested area passed the post-installation signal test on all three carriers.

View project

South Australia

Hotel mobile repeater hub

A repeater hub with one CEL-FI G41 module each for Telstra, Optus and Vodafone, fed from three rooftop grid donor antennas, with ceiling dome antennas in the bar, dining room, kitchen and entrance of a working hotel.

View project

Northern Territory

Hotel mobile repeater hub

A repeater hub with one CEL-FI G41 module each for Telstra, Optus and Vodafone, fed from rooftop grid donor antennas, with ceiling dome antennas from the commercial kitchen to the public areas of a hotel.

View project

Western Australia

Liquor store mobile repeater hub

A single retail store covered by one Proeye repeater hub with a CEL-FI G41 module each for Telstra, Optus and Vodafone, fed from rooftop grid donor antennas, with ceiling dome antennas and a wall-mounted panel antenna.

View project

Tasmania

Liquor store mobile repeater hub

A single retail store covered by one Proeye repeater hub with a CEL-FI G41 module each for Telstra, Optus and Vodafone, fed from rooftop grid donor antennas, with antennas on the shop floor, in the cold room and in the stockroom.

View project

See all projects and the photo gallery

Radiofrequency monitoring when it matters

Beyond permanent installations, Proeye provides real-time spectrum monitoring for major events and special operations.

Using real-time spectrum analysers and ultra-wideband antennas, our team identifies interference sources, frequency congestion and signal anomalies before and during live events, broadcasts and temporary deployments.

About our consultancy services
Proeye team members monitoring radio frequencies from a broadcast box overlooking a stadium
RF monitoring equipment and laptops set up in an event operations room

Why clients choose Proeye

More than 25 years of hands-on work in communications and security infrastructure since 1999, led by founder and technologist Paul Di Berardino.

Certified designers and installers

Nextivity certified for CEL-FI design, installation, maintenance and hardware installation, with in-house DAS design and engineering.

Documented from survey to handover

Detailed signal reporting and project documentation, with end-to-end project management through to handover.

Australia and New Zealand, supported long term

A Melbourne team delivering projects across Australia and New Zealand, with remote management, maintenance plans and on-call support.

An IT provider, builder or head contractor?

We work as a specialist subcontractor, or coordinate the teams on larger ICT and DAS projects. See how we work with partners, and request our capability statement.

Working with Proeye

Meet the team

Start with a free initial desktop analysis

Send us the site, the carriers involved and where coverage fails. We review it at no cost and tell you whether an onsite RF survey is the next step.